GReddy Specialized Oil 20L

Product Features

GReddy SPECIALIZED OIL 0030

This fully synthetic oil was developed with the concept of realizing not only excellent oil film retention performance in the high temperature and high load ranges of the FA20/FA24 engine, but also sharp response by reducing friction loss and viscous resistance, and suppressing power loss.

⚫︎The base oil is a blend of VHVI, which has little change in viscosity due to temperature, and PAO, which has excellent low-temperature properties. The low-temperature pour point is -45°C, and the oil is quickly supplied to the inside of the engine to provide lubrication even during cold start-up.

In addition, it contains esters that adsorb to metal surfaces, forming a strong oil film inside the engine. It prevents metal wear caused by dry starts during startup, and firmly lubricates and protects the inside of the engine even in high temperature and high load conditions such as circuit driving.

⚫︎Contains FM (Friction Modifier) ​​Booster that reduces the coefficient of friction. It acts in the boundary lubrication area where metals come into direct contact with each other, forming a film on the metal surface to reduce friction. In addition to improving response, it also suppresses metal wear and the generation of frictional heat, and suppresses the rise in oil temperature.

GReddy SPECIALIZED OIL 0540

This fully synthetic oil was developed with an emphasis on engine protection through excellent hydraulic stability and strong oil film retention to deal with the rapid rise in oil temperature that occurs during sports driving with the FA20/FA24 engine.

The base oil is a blend of three types of esters that have excellent heat resistance, lubricity, and hydrolytic stability. These special esters adsorb to metal surfaces, forming a strong oil film inside the engine.

⚫︎ In addition, PAO, which has excellent low-temperature properties, is blended into the base oil to support all temperature ranges. The low-temperature pour point is achieved at -60°C, and oil is quickly supplied to the inside of the engine to provide lubrication even during cold start-up.

⚫︎Contains FM (Friction Modifier) ​​Booster that reduces the coefficient of friction. It acts in the boundary lubrication area where metals come into direct contact with each other, forming a film on the metal surface to reduce friction. In addition to improving response, it also suppresses metal wear and the generation of frictional heat, and suppresses the rise in oil temperature.

specification

Representative properties

0w-30 20L

TRUST CODE: 17501267
JAN CODE: 4991995543381

5w-40 20L

TRUST CODE: 17501270
JAN CODE: 4991995543398